Crickit Prerequisites

Setup Crickit for development

Note

No additional power supply is needed for the following steps

Update the Crickit

  1. Plug in USB cable into seesaw/Crickit
  2. Double-click the Crickit Reset button
https://cdn-learn.adafruit.com/assets/assets/000/067/690/thumb160/circuit_playground_seesawreset.jpg?1544825407
  1. Look for pulsing yellow LED
  2. Look for a New Disk on Your Computer [CRICKITBOOT]
https://cdn-learn.adafruit.com/assets/assets/000/057/191/medium640/circuit_playground_crickboot.png?1530833011
  1. Download the latest firmware
  2. Drag UF2 file onto CRICKITBOOT
https://cdn-learn.adafruit.com/assets/assets/000/057/192/medium640/circuit_playground_drag.png?1530840561
  1. Party!

Power Supply

Now plug in the included battery bank for power supply

Hint

For more help, refer to adafruit’s website for further guidance